Same-Day Service7 Days a WeekFree Estimate
Delmarva Plumbers
Delmarva Plumbers
Plumbing · Tools
Call
Free tool

How Old Is My Water Heater? Age by Serial Number

Type the serial number from the label and get the build year, the age against the typical 6-to-12-year tank life, and what to ask a plumber.

Tap to Call(855) 321-3426

A real person answers. Free estimate, no obligation.

Instant estimate No sign-up One tap to a pro

Water Heater Age Checker

From the serial number on the data plate
Runs on your phone; the photo is never uploaded.

Where to find the data plate on your water heater

  • A sticker or plate on the side of the tank, usually near the gas valve or the electrical cover.
  • Tankless: on the side or bottom of the case, or inside the front cover.
  • The ANSI standard year on the plate is the earliest the unit could have been built.

An estimate from published serial-number formats. Makers change formats, and the same code can mean two different years, so treat this as a best read. A date printed on the data plate always wins. Typical service-life ranges: InterNACHI Standard Estimated Life Expectancy Chart for Homes.

An estimate from published serial-number formats and typical service-life ranges. Makers change formats and reuse codes, and a date printed on the data plate always wins. A local pro can confirm the age and the condition.

Manufacturer serial formats (public technical references), compiled 2026-09 · Updated September 2026

How water heater serial numbers encode the date

Three makers, three different codes

Bradford White uses two letters: the first is the year on a 20-year cycle and the second is the month. Rheem, Ruud and Richmond print the month then the year in the first four digits after any letters. A.O. Smith, State, American and the store brands they build print the year then the week. The same four digits mean different things on different labels, which is why the tool asks for the brand first.

Why a tank has a shorter clock than a furnace

A storage tank is steel with a glass lining and a sacrificial anode rod. Once the anode is used up the water goes after the steel, and the tank fails from the inside out. InterNACHI puts a conventional tank at 6 to 12 years and a tankless unit at 10 to 20 with regular descaling. Past ten years, a tank in a finished space or above living areas is a flood waiting for a date.

The 20-year letter problem

Bradford White reuses its year letters every 20 years, so D means 1987 or 2007 and M means 1995 or 2015. The tool lists both and asks which decade the heater was installed. Two tiebreakers help: an 8-digit sequence after the letters means late 2007 or newer, and the ANSI standard year on the label is the earliest the unit could have been built.

Common questions

Where is the serial number on a water heater?

On a sticker or metal plate on the side of the tank, usually near the gas control or the electrical access cover. Tankless units carry it on the side or bottom of the case or inside the front cover. The same label lists the model number and, on newer units, the manufacture date.

How do I read a Bradford White serial number?

The first letter is the year and the second is the month. DG6322957 reads D for 2007 (or 1987) and G for July. Year letters skip I, O, Q, R, U and V, and month letters run A to M skipping I.

How do I read a Rheem or Ruud water heater serial number?

After any letter prefix, the first two digits are the month and the next two the year. 0804B10488 was built in August 2004 and RHLN0106534307 in January 2006. Newer styles put the week first, and the tool tries each published layout in turn.

How long does a water heater last?

A conventional storage tank typically lasts 6 to 12 years and a tankless unit 10 to 20 years with regular maintenance (InterNACHI chart). Hard water, a never-replaced anode rod and a tank that was never flushed pull the number down.

Should I replace a 12-year-old water heater before it fails?

At 12 years a tank is at the top of its typical range. If it sits above finished space, shows rust at the bottom seam or the fittings, or the anode rod was never replaced, a planned replacement beats an emergency one. Ask a plumber to check the anode, the seams and the relief valve and to say what a like-for-like swap would involve.

Get an exact answer from a local pro

Free to call — get connected with a local pro in your area.

Tap to Call(855) 321-3426

Keep going

Find a local pro in DelawareAll tools & calculators

disclaimer: Delmarva Plumbers is a free service to assist homeowners in connecting with local service providers. All contractors/providers are independent and Delmarva Plumbers does not warrant or guarantee any work performed. It is the responsibility of the homeowner to verify that the hired contractor furnishes the necessary license and insurance required for the work being performed. All persons depicted in a photo or video are actors or models and not contractors listed on Delmarva Plumbers.

Same-day and 24/7 emergency services are subject to provider participation, location, technician availability, and demand. Availability is not guaranteed and may vary by market and appointment capacity.

We use cookies and session-based analytics, including session replays (with form inputs masked), to improve this site. See our Privacy Policy.

About · Contact · Privacy · Terms · Disclosure · Sitemap

© 2026 Delmarva Plumbers. All rights reserved.